Targeted Individuals Anxiety Red Eyes Electronic Harassment Bullying Cyber Bullying Bullies Stalking Electronic Stalking Cyber crime DEW Neurophone Spyware Counter spy information services Health risks of EMFs EMFs Microwaves Microwave weapons Weapons Social media Mob stalking
Updates On Protective Clothing and Fabric To Save The Day!
The following items are either no longer available and I am providing a sort of substitute to near same blocking capability. Or are available and I am giving you information that may save your life.
Circutex Fabric - I have to say that this fabric was the best fabric at blocking - I kid you not. It was by far some of the most effective fabric I have ever purchased and used. It blocked microphone signals, motion detectors, demodulation and v2k. However, It did not block microwave signals.
Update - sadly, and I am not sure why - this fabric was discontinued nearly 1 1/2 years ago. I have looked everywhere only to be told it Is no longer being manufactured. I believe because it was highly flammable. Or maybe because it worked and it was yanked for that reason. Maybe all of the gang stalking organizations bought it up to prevent you from being comfortable. Who knows!?? The silver content in it was over about 50%. And when grounded - it was so amazing, I cannot even begin to describe how well it blocked.
Here are a few substitutes -
Arganmesh - 55% SILVER. Over $25 or less - a linear foot. sold at www.LessEMF.com www.Amazon.com And you can also find it at other online stores selling Fabrics that block and shield. I personally like this fabric but I layer it with other silvers to get the some of the same effect I got with Circutex.
Ripstop Silver fabric - (recently and currently unavailable) Not sure if it will return. But here is an explanation of the fabric. So that in the future you can check out other fabrics and compare them. Ripstop is pure silver coated onto other nylon. It proecdts up to 4 Ghz. So, not my favorite, but I use it. The fabric is only sold on Amazon.com.
Staticot Stainless Steel Fabric and Grounding material. It runs between 12 and 19 dollars a linear foot. Depending on where you buy it. This amazing fabric is effective between 1 and 40 Ghz which is amazing. The thing is - you have to ground this with a grounding clip and make sure it is safely grounded in your home. This fabric is sold on Amazon.com and also on www.lessEMF.com
This fabric is phenomenal - is probably the best grounded fabric out there because of its grounding range. It is made from woven in stainless steel fibers - and please note - it can also be used to make clothing. This fabric, because of its lightweight design, can be safely hung on the wall or ceiling - but remember your grounding rules and make sure you have pieces of electrical tape at points where the fabric touches the wall or ceiling- For the best results - make sure you ground this fabric for maximum benefits. Staticot does not protect as well from microwaves but does block demodulation, V2K, listening devices and motion detectors.
Silverell knit fabric - sold at www.lessEMF.com -
Products, when available, consist of boxer shorts, Esmog pants, and hoodies. And brain coats. To date - There is a worldwide shortage of gray Silverell fabric. The reason I have placed this item here is because when it is sold in bulk and in linear pieces - it is like circutex or Arganmesh with blocking capability. Possibly better.
This fabric is amazing and if and when it does come back on the market - I would suggest you buy either the fabric itself or something made out of it and keep it on to protect your vital organs and brain. This fabric is also effective against radiation and microwave signals. And covering your bottom part of your body with the shorts and pants will protect your intestines, kidneys and other vital organs from a nasty microwave burn.
Please purchase these items for your sanity...if you can at some point in time. If bought in large pieces - can be hung on walls or ceiling and grounded.
Silverell has a protective range from 1 - 10 ghz .
There are new hoodies on www.lessEMF.com which are effective up to 4 Ghz. It is being touted as the new EMF protection hoodie. Its protective range is not great as Silverell but not bad either. Because - We all know that with gang stalkers - the power used and that will be used on us eventually will get stronger. And then stronger. And if you are trying to prepare - it is better to be high than low with protection.
Brain Coats - brain coats I have previously told you about - brain coats are made from silverell fabric. Effective up to 10 Ghz. With these caps - you simply pull it down over your scalp and ears and it helps to hide your brain and scalp from the homing or hunting signals and demodulation signals of directed energy. I have been experimenting with this for months. I can sit out in an open chair and as long as I have my brain coat layers (about 6) on and my noise cancellation headphones on - I don't get found. Or if I do - don't feel the signals as much. But this depends of the energy used to hunt you.
I have also found that not turning the noise cancellation button on protects you better at certain times. In other words, keep the headphones on your head and over your ears, but don't turn on Bluetooth. That is a dead giveaway to your nasty perps.
Over time - my stalkers starting homing in on the headphone signal that my Bose headphones put out - so, I figured this out and just made sure I had the headphones on - they still make things somewhat quieter. And wear foam earplugs. Demodulation is nasty and it gets stronger and stronger and there are times you get hard wave blasts of it - so - again, make sure your head is covered - because as it turns out...that is how you are being found. Electrical activity in the brain.
All of the lightweight fabrics I have told you about can be slept under and you can ground them. Or not. Please remember when grounded = fabrics are more flammable. Personally, I am willing to take that risk for my protection against horribly strong signals.
But I also use other things as well - rubber mats, zinc metal sheets, lead sheet metal, cast iron, muMetal, ....and GIron. Since my neighbors are using various angles to shoot energy at me - there are always direct lines from their house to my bed through my roof and walls. Actually many direct lines with very high meter readings. So now...My closet wall is a virtual battle shield of barriers.
Other protective items still available for purchase... for walls and ceilings and attic.
MuMetal and Giron are both still sold on www.lessemf.com But as of today - mumetal has been replaced it appears by magstop metal. And by SHIELDENE® CORROSION RESISTANT MAGNETIC SHIELD PLATE. You can still buy MuMetal on Ebay for a gouged price.
Keep in mind - Metal blocking plates and Giron are 2 completely different blocking materials. And they are not a lightweight fabric at all. Metals are typically a hard sheet metal and can be grounded. Giron is a blocking material that is not meant to be grounded. It blocks by its engineered design. It is sort of a weave of metal and plastic hence the reason for not grounding. Do not use a grounding cord or use Giron near open flames.
Both Magstop and Shieldene and Giron are still available at www.Lessemf.com Giron is expensive and runs roughly over $65 a linear foot. Personally - I am not so impressed with the metal they sell. They never really helped me feel protected or comfortable. MagStop metal and Sheldiene are also very costly. They are sold by linear foot so when you go to the site - if you see $59 - that is per foot. I am still using the Giron I purchased. It is in my attic and there it stays. Because a little blocking is better than no blocking.
You can also find Giron At www.amazon.com. https://www.amazon.com/MAGNETIC-SHIELDING-FLEXIBLE-FILM-Protects/dp/B00JL3MUQO/ref=sr_1_4?dchild=1&keywords=giron&qid=1597427892&sr=8-4 And anywhere else shielding metals and fabrics are sold.
In my opinion - lead and zinc sheets of metal (on walls or on floors) and good old 100%rubber mats work best. You can ground zinc and lead - but make sure you use electrical tape at the corners of your metal - between the metal and the wall - where your lead or zinc touch the walls or beams in the attic. Grounded metal against wood is a fire hazard without the proper grounding setup. You can also put your rubber layer down first and then the grounded fabric. This should be ok.
Aluminum is not so hot - in my opinion. Despite what you read about Aluminum and aluminum foil being a protector from having space invaders read your mind - well, let me just say, this is shit. And maybe in someone's imagination and in the old days it might have been the option... because there was nothing else.
The most important thing to remember is - The best materials to date can be grounded and since Aluminum does not ground as well...it is sort of a waste of money. And furthermore, it rates very poor as far as grounding material goes. Sort of a luke warm item and does not protect you from microwave burns - Demodulation or V2K signals. So my question is - why bother?
Cast Iron or cast iron skillets - you know - like your grannie's old kitchen skillet. It can be any form of iron and there you have it - a 100% blocker - but it is quite heavy and hard to place or position. Still if you can manage a wall of connected cast iron griddles without them falling on you and crushing you - Make sure to cover the seams with copper tape - since cast iron is an excellent blocker - your problem just might be lessened or resolved!
Rubber mats - pure rubbers mats only - absorb energy and slow its travel. It is harder for your perp to hear or sense you through rubber - especially when combined with other material for a shield. And rubber is one of my top picks in this counter measure of protection - I really highly recommend Rubber - especially against microwaves and microwave burns. You need to place the rubber between you and the incoming signals.
Let's talk about Nickel and copper fabrics - these fabrics are available always. Also sold at www.lessEMF.com. They can be safely grounded in the home...but should never come into contact with your skin. They can cause your skin to have a reaction. Do not make clothing out of Nickel or copper and do not sleep under or ground these fabrics against your skin. Burns perhaps?
Magnetic rare earth magnets and magnet boards. This is my greatest find. Rare earth magnets Can be expensive by the time you build a grounded 2 foot by 3 foot board - they run about $18.00 for 10 magnets and can be found almost anywhere. Make sure it is a rare earth magnet with a center hole for mounting and between 65 to 100 lbs of pull weight.
These magnets are super strong and can be dangerous if not handled properly. Keep your hands and fingers from being pinched between magnets. It is painful.
These boards and magnets when grounded are pretty much 100% effective. The problem is - your perps can move their weapons all over the place in your walls and roofline. But happy to say - you can move your boards too! And you can build many different boards. Remember these are very heavy boards - so you will need a good support when placing it in position. Here are instructions on how to build a board. Magnets, Magnets, Magnets....
And here is something new - I am still in the effectiveness research phase of magnetic chalk boards. To date, I have found magnetic chalk boards to be very useful in protection against Directed Energy Weapons.
Even more effective than the board itself - is actually grounding the boards. You will need to take copper wire - about 20 gauge - thread it through several 65 to 100 lb pull weight rare earth magnets - 3 or 4 total and even more for a stronger field - each about 2 - 5 inches apart - As you thread each magnet - stop at at about a 2 or 6 inch distance on the copper line and then tie a loop around each magnet to hold them in place on the line. Please don't let the magnets touch each other or they will not come apart. And if your hand or fingers get in the middle - ouch - ouch - ouch!
Once your grounding copper line is threaded through your magnets - Place the wired magnets down in the line you created as you build or design your magnetic copper line - on the black magnetic surface - north side or pull side (against the attraction black surface) of the board and secure your copper line with duct tape on the board as well - then take a grounding clip and cord - connect the clip to the copper line and plug it in. This design is a cheaper form of my magnet board because the entire surface of the magnetic chalkboard becomes grounded. The bigger the magnetic chalkboard - the bigger the area of shielded protection is. So far - if I have these placed correctly - the shield effectiveness is about 95 percent. Sometimes the perps get around it. But that is not the magnetic board - it is, instead, the placement of your stalkers' directed energy weapon in reference to the position of your board. The good news is - Like a chess game - the stalkers make a move - but then you can move your board also.
YShield Paint (carbon based paint) sold at www.Lessemf.com - a good product and I recommend it.
You really should follow instructions on this accurately. but what you want to do is buy the paint, a grounding plate kit, and a grounding plug. All of this will run you about $150 for a 50 square foot wall. For larger walls - you need to probably buy much more. Here is the price list of the paint only. Keep in mind - if the wall is 180 square feet - you will need at least 3 liters of pain and 2 or 3 grounding kits. Or 1 grounding kit and extra copper tape.
YShield Liquid (Cat. #A290-20L) ....... $899.95 per 20 liter pail
YShield Liquid (Cat. #A290-5L) ............ $329.00 per 5 liter pail
YShield Liquid (Cat. #A290-L) ................... $69.95 per liter can
YShield Liquid (Cat. #A290-4oz) .......... $29.95 per 4 ounce can
This paint shields up to 18 ghz - which is absolutely amazing in this gang stalking attack. It is a great barrier to much of the microwave assaults and a great many demodulation and v2k attacks.
If you know the wall or ceiling that signals are coming through - either hire an electrician to help you set the grounding apparatus in place or carefully set it up yourself. Follow downloaded directions. Do not paint until this process is complete. And DO NO PAINT OVER THE COPPER TAPE UNDER THE GROUNDING PLATE. IT HAS TO HAVE CONNECTION TO GROUND.
Simply - here is how it goes - grounding plate base screwed to a side part of the same wall... you want covered - closest to the floor but on the lower part of that wall - next, The first piece of copper tape - long strip extending upwards over the entire wall height. This piece should touch and cross over the grounding plate base as the beginning point.
Make sure to take the tape to about an inch below the plate from top to bottom and from left to right - crossing center point on the metal plate and extend across to edge of wall. Then cross pieces of copper tape side ways across and connecting to the main tape that is attached to the plate going up your wall. Making sure to cross them over the main strip at even distances apart side to side and going all the way from floor to ceiling. This is why you might need extra copper tape. Once the grounding plate is set up and your strips are in place -
Next, Put your ground cover over the grounding tape and base plate and again...do not get black paint on your copper tape below the grounding plate at all.
Next paint around the grounding box and plate and paint entire same wall - I used 4 coats. Directions say 1 or 2.
When dry - plug your grounding line into the plate and then attach your grounding plug into that and plug into a grounded wall plate or extension cord.
Your wall will be black - and I mean really black - and you can use latex paint over it - but I prefer to keep mine black. The paint is ground up carbon in paint - reason for black color. Effectiveness is about 80 percent. I still use my silver fabrics and some metal sheets over this wall as a heavier barrier.
Mine is doing well...so far. But I have many other layers of shielding items with it.
Lead Aprons and Lead blankets - I can't express how great these are in attacks. And they are available - for the right price. Please make sure you find your lead item at least .5mm pb content. Real lead. I want you to know that real lead is 100% in blocking capability. But costly. I am always looking for a very large lead blanket - but that would be heavy and hard to handle. Small lead blankets in a 2 by 3 foot size are about $180.00.
www.amazon.com https://pjxray.com/ https://www.zzmedical.com (Please note - when clicking on the links for Pjxray and zzmedical you will have a page come up - you will need to click on the link that states Open this in a new window - from that page. It will take you to the site)
Lead is better for shielding against radiation. Gang stalkers use extremely high amounts of radiation. I have a lead apron. and 2 lead blankets. I am about to purchase a lead cap. To wear over my silver caps. Believe me - my attacks escalate each and every week. I say...whatever.
When will they quit?...who the hell knows - they are spoiled … they want their way. They are not done with their experiments on you. So I have to say probably not for a long time until they see injury. And believe me when I tell you - I am not going to allow that as much as possible. And neither should you!